Create A Shed Base Without Concrete

Can be done in as little as 1 hour

Use Stabiliser Blocks & Aggregate. 7 Steps to preparing and creating a fantastic load bearing base for your garden shed without the need for concrete!

How To:-

  1. Measure. If you have a 10 x 8 shed mark out a 12 x 10 space where you wish to position your shed. Use a small wood stake for each corner, then tie string around outside.
  2. Dig away the soil/grass within the string area. If ground is flat you don’t need to go deeper than 40mm.
  3. Level area (using soil or aggregate). Get a straight edged piece of wood and drag across the surface (piece of skirting, baton or a fence board will work).
  4. When area looks level place wood on its edge and spirt level on top, fill where required until level.
  5. Place Membrane into the area.
  6. Lay Stabiliser blocks on top of membrane. Simply lock together, this is as easy as clicking Lego together.
  7. Shovel aggregate into place over the stabiliser blocks.

Thats it. Build your shed! Not using concrete means no drying and waiting.

The perfect DIY Garden Shed Base ....

Tools Required

  • Tape Measure
  • Spade
  • Spirit level
  • Straight piece of wood
  • String

Why Create Without Concrete?

  • Impressive Load bearing capacity >360tonne/m2
  • No drying time
  • This type of base can also be used for creating extra parking areas, area to pitch caravans etc.

The products you need to create the perfect garden shed base:

Check out the full range of aggregates …

Delivery: We provide a fast delivery to many local locations